Solar Panel Charge Controllers PowerTech 30A (D64005)

D64004, D64005 are MPPT controllers and are suitable for ALL types of Deep Cycle Batteries including Lithium and the LiFePO4 batteries. These controllers come with single input and 2 outputs (1 to your battery, 1 to your electrical system) and 2 USB charging ports (1.1A, 2.0A). These are the cutting edge of technology for solar charge controllers and as a result are reasonably expensive when compared with the PWM style.

To get the best life from your Deep Cycle Battery, it is best to use a controller that is designed for the battery type. Using a PWM style controller with a Lithium Battery may reduce the effective life of the battery.

Category:

Description

When it comes to modern solar controllers, there are 2 main characteristics that needs to be considered:

  • PWM (Pulse Width Modulation) controllers – Cheaper but less efficient controllers. The PWM controller is in essence a switch that connects a solar array to a battery. The switch is “flicked” ON and OFF as needed (pulse width modulated) to hold the battery voltage at the absorption voltage. The result is that the voltage of the array will be pulled down to near that of the battery.
  • MPPT (Maximum Power Point Tracking) controllers – More expensive but more efficient controllers. The MPPT controller could be considered to be a “smart DC-DC converter”, i.e. it drops the panel voltage down to the voltage required to charge the battery.

Reviews

There are no reviews yet.

Be the first to review “Solar Panel Charge Controllers PowerTech 30A (D64005)”

Your email address will not be published.